ASR 4 - Front Fairing and Appointed Officials (Bulletin 13 - X30 Southeast Asia 2017)

5/9/2017

Hello Drivers and Teams,

 

Attached is the latest ASR for X30 Southeast Asia containing the list of appointed officials and the important points below:

 

3.3.  There must be a clearance of minimum 60 mm between the top and bottom front bumper tubes at all times, measured between the front fairing mounting brackets.

 

3.4.   Beginning from Round 3 onwards, there must be a clearance at all points between the front bumpers (lower and upper tube) and the front fairing of a minimum of 27 mm at all times (refer to CIK Technical Drawing No. 2c).

 

Thank you.

Share on Facebook
Share on Twitter
Please reload

© 2016-2020 IAME Series Asia

IAME Series Asia reserves the right to amend information on this website at any time.